Discuss Anyone seen tap heads like these and know how to get the caps off? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
- Messages
- 34,358
- Solutions
- 2
Top unscrews above the grip
Reply to Anyone seen tap heads like these and know how to get the caps off? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT.
THE FRONT PLATE WITH MIRA ON...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Capping a redundant gas cooker supply
- Started by Jocky B
- Replies: 3
-
-
Water pump to regulate high pressure?
- Started by Nikileaks
- Replies: 2
-
Any advice for putting this shower in ?
- Started by Staggersandfalls
- Replies: 2
-
king of pipes no reply from private message
- Started by cjg
- Replies: 1
-
-
-
Why pressure gauge drop without leak
- Started by sanju pradeep
- Replies: 6
-
Hot water so hot tap and shower via our hot water tank
- Started by thecar
- Replies: 4
-
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 2
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
DUK Pipes for thermostat shower fitted at different heights
- Started by Delforkids
- Replies: 2
-
-
