Search the forum,

Anyone know where to buy lockshields with brass bit inside?

Post new thread

Discuss Anyone know where to buy lockshields with brass bit inside? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

WaterTight

Esteemed
Plumber
Subscribed
Messages
5,439
15mm by 3/4" but without that rubber seal they all seem to have now. Sheds all seem to do rubber seal ones. Tried Grahams who only do those now. Anyone know a national merchant that does them?

Good for when it's really tight and/or you need to horse it up proper. With a bit of paste the old type are bullet proof.

Thanks
 
Pt or city's do them
 
Status
Not open for further replies.

Reply to Anyone know where to buy lockshields with brass bit inside? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Waste to trap loose fitting
just put a new pop up waste into my basin to find the trap does not fit correctly.. the trap fits just inside the waste thread opening and butts up against the plastic shoulder ensuring the rubber seal is pressed against the end Face of the waste. im able to screw the nut up but even when its...
Replies
7
Views
867
fowlerboi
F
D
Soldering poorly fitting joint - pipe not round, good fill, how?
Hi, Short version: I have about 4" of pipe sticking out of a concrete floor in a cupboard. It makes a 45-degree bend as it exists (bent, not with elbows), the last cm before the open end is pretty much straight, but as a result of the bend it is not perfectly round. I mean it is pretty much...
Replies
14
Views
1K
gmartine
gmartine
J
Why do I hear a hammer related noise coming from my water pipes?
This issue arose about a year ago. Does anyone have an idea why I occasionally hear (about once every hour or longer) a hammer related noise coming from my copper water pipes when no water is being used? It basically sounds like the noise you hear after the water shuts off when your toilet bowl...
Replies
0
Views
375
Jackson710
J
S
Will this seal? or are there alternatives
Just finished tiling and im fitting a wall hung geberit wc with a washlet which has its own water supply. The kit for the install comes with a 90 deg elbow which i believe from the instruction pictures, is designed to screw into a threaded adapter at the end of the water supply. Because i used...
Replies
2
Views
927
Serval
S
Dale_R
    • Like
Recent house purchase - CH/HW Major issues.
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical, carpentry it's been never ending. The house was built by Barratt Homes in the year 2000, it is a 3 bedroom house called a Palmerston, the CH/HW system is a Y...
2
Replies
47
Views
5K
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Advice
Electrical Advice | Electricians Blog
Contractor Talk
Tilezine Tiling News Tile Association
DIY Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock