Search the forum,

Anyone for Super Bowl tonight?

Post new thread

Discuss Anyone for Super Bowl tonight? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
AlexGas

AlexGas

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,849
Won't be able to watch it, early start for me tomorrow morning...
 
I don't understand rugby. I understand American football even less!

Still it can't be much worse than watching Crystal Palace at the moment.
 
American "Football" seems to me to be three minutes of action followed by five minutes of break time. takes twice the length it should to play. and what is it with the extra padding on someone who is built like a brick outhouse.
 
steveb said:
American "Football" seems to me to be three minutes of action followed by five minutes of break time. takes twice the length it should to play. and what is it with the extra padding on someone who is built like a brick outhouse.
Click to expand...

Bit harsh on Lady Gaga, I'll volunteer to check if there's any extra padding.
 
Status
Not open for further replies.

Reply to Anyone for Super Bowl tonight? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
200
ShaunCorbs
ShaunCorbs
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
286
oz-plumber
O
J
Leak detection company
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
295
John-sjw
J
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
235
Chuck
C
Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
73
Dan
Dan
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock