Search the forum,

Discuss Another One Bites the Dust - Euroheat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Worcester

Esteemed
Plumber
Messages
1,005
Just got an email from Euroheat saying that they have closed their doors.

That leaves quite a big hole in the distribution market.


One of the best, knowledgeable distributors supplying HDG and SHT log and pellet boilers. Sad to see them go.

Victim of the RHI mess (similar to the FiT Mess)
 
Last edited:
We are finding alot of the companies around us are going under, all went mad doing cheap installs using cheap pumps, very little design process and over selling rhi returns. Now the bottoms fell out of the install market, they are dropping like flies. Does mean we are getting alot of repair and servicing contracts but the systems are s*** we are taking on.
 
Hi Miss Plumb, we're finding the same thing, often having to put right backends, flues, reconfiguration, etc first, general comment from clients when we're finished "it's never worked this well before, thanks" :)

Great for business:)
 
Status
Not open for further replies.

Reply to Another One Bites the Dust - Euroheat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
109
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
248
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
120
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
142
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock