Discuss Annual Gas Safety Boiler Inspection Check in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Gas meter accessed? Depends on make and model of boiler mate?How did you find them?
Gas safe website?
Many of the checks are visual but the gas meter would need to be accessed, front of boiler removed etc etc
Any advice about how to proceed next?
I wish I could be out within 30 minutes on an Landlords or a service. I must be doing something wrong mate.Boiler only, a property I have been to before and a modern appliance - I would take about 30 minutes.
This would involve paperwork and print outs from the flue gas analyser
So they are doing “drive by “ CP12 ‘s now .
I mean you need to get to the gas meter for gas rate, tightness test checking bonding etcGas meter accessed? Depends on make and model of boiler mate?
If the boiler is old, you can do a burner pressure and not an Gas rate and output rating. Even though I do a tightness on every landlords or service it isn’t law on a landlords (stupid I know)I mean you need to get to the gas meter for gas rate, tightness test checking bonding etc
You would still want to visually check the meter, reg, ECV, pipework etc though.If the boiler is old, you can do a burner pressure and not an Gas rate and output rating. Even though I do a tightness on every landlords or service it isn’t law on a landlords (stupid I know)
Maybe he was ill and didn’t want to let you down?The boiler in question is an Ariston micogenus 28, about 9 years old. I did not see any flue analyser being used by the engineer. I suppose the issue too is can work be contracted out to other third parties. I expected to see the engineer who I booked the job through. Web site states he is a sole trader, not one of those call centre websites where you can book a gas/ch job and they can send anyone.
Reply to Annual Gas Safety Boiler Inspection Check in the Plumbing Jobs | The Job-board area at PlumbersForums.net