thanks ray,
first thought on the outside, i like the design and size (compact) but, as an injionear, i stripped it apart and thought it was one of those 'blue peter' designs!!
seen bigger magnets on my tin opener (one for improvement me thinks!) & the filter might be better using a sponge like gauze. like the price though although i did sell it at £85.:hand:
i did not like the way the brass drain-off valve rocked from side to side when undoing the valve with a screwdriver. it gave me thoughts of future failure!.
i also had no choice but to mount the filter at a 25deg angle due to the available pipes but the instructions did not clearly say plumb-bob verticle either? however, it seems to be ok.
one point to mention is the brass iso valves were of the insert compression type and not a flat flange like tf1's etc, which made it very awkward to get onto the restricted pipework.
in all. not bad for the price but it could be improved a lot in practicle design/parts aspect for little if any extra costs!.
martin reporting from the east
midlands@w&co.com