Search the forum,

Discuss Abru multi function ladder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

LUCIALIA

Plumbers Arms member
Plumber
Messages
220
Does anyone have a set of instructions for an Abru multi purpose ladder, model no 24004?
 
Guess I walked into that! :banghead:
No they're not complicated just wanted a butchers at the instructions
 
if it doesnt have class 1 written on them somewhere. leave them at home, not worth using diy kit as a proffessional omho
 
Already tried the website and even emailed them but they don't have the information.
 
Already tried the website and even emailed them but they don't have the information.

Thats probably because you don't need instructions on how to work a ladder.
This is about all you need to know http://www.abru.co.uk/pdfs/leaflets/lf21055.pdf but i'll add a couple of other things
They have stupid levers you pull to unlock then you wrestle with the ladder until it clicks into the next position then you pull out the lever and wrestle with it again to the next position. Taking it down is just as bad. You need lots of space to swing it about.
Seems like a good idea but in reality they are probably the worst ladder in the world.
I bought 2 of them years ago. They take up too much space in the van, they are a nightmare to use inside a house, fold it into a trestle and it is too high to use. I got P'd off with them after a week or 2 and and just left them lying somewhere. I think i threw one over a fence after i jambed my finger in it.
 
Thats probably because you don't need instructions on how to work a ladder.
This is about all you need to know http://www.abru.co.uk/pdfs/leaflets/lf21055.pdf but i'll add a couple of other things
They have stupid levers you pull to unlock then you wrestle with the ladder until it clicks into the next position then you pull out the lever and wrestle with it again to the next position. Taking it down is just as bad. You need lots of space to swing it about.
Seems like a good idea but in reality they are probably the worst ladder in the world.
I bought 2 of them years ago. They take up too much space in the van, they are a nightmare to use inside a house, fold it into a trestle and it is too high to use. I got P'd off with them after a week or 2 and and just left them lying somewhere. I think i threw one over a fence after i jambed my finger in it.


Just what I thought but could'nt be arse'd to put into words.
 
Status
Not open for further replies.

Reply to Abru multi function ladder in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
234
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
228
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock