Hi,
I have a combi boiler that supplies hot water to two ufh manifolds. We only have ufh and no radiators. I am trying to find the most efficient way to heat our home. What would your recommendations be on the following ways to set our system up.
A) Set the ufh mixer to max so it isn't doing...
Hello all
I have a Worchester Bosch greenstar 32CDi combi with an S plan, 3port for UFH downstairs (4 zones) via manifold & mixer valve, & upstairs 4 rad system, with towel radiator always open for a bypass.
I have a full tado system that is basically set to relay on/off when any thermostat...
need to replace old john guest hard wired UFH room stat, spoke to manufacturer and there is not direct replacement available. we have put in a standard UFH dial stat but it is not working with the john guest wiring slave & slave programme.
I am not very familar with the UFH wiring and nothing...
Hello my hearing pump failed over the weekend and a new Grundfos Ups3 was installed to replace Geundfos UPS 15-50. Hot water and central heating were reinstated however as soon as the UFH was turned on the downstairs radiators went cold but the UFH became warm. I have turned everything off and...
Done a fair bit of reading and spoke to numerous plumbers/heating engineers and I get so many different answers to my question. By nature I'm a pretty inquisitive bloke and like to know how things work and if its the best way to do things. So my first question is does a single zone UFH setup...
Hi There
Currently using a Panasonic Air to Water UFH heating system in a new build and appear to have some gremlins in the system
1 - I've noticed that the kitchen zone is always hot if any other zone in the building is on. What could be causing this?
Additional info - I think it is not...
Deleted member 113144
Thread
air to water
always
causing
forum
plumbing
ufhufhhelp
zone
Good afternoon.
We have just finished our single storey extension and due to costs, I have done quite a lot of the work myself (GRP roof, kitchen fitting, joinery etc)
I also laid all of our underfloor heating pipes and connected to the UFH manifold having spent hours researching both online...
Hi all new to the forum, I have recently moved into a new build house with underfloor heating installed throughout the ground floor, 4 zones, kitchen (tiled),lounge (carpet), hallway (tiled), mancave/front room (carpet). It’s an Emmeti system with manual thermostats in each zone.
I turned it on...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.