Hi
Sorry if I sound completely stupid, but just after advice.
Had gas meter moved outside and the new copper piping from meter feeding back through in to the wall, this new piping has then been attached to some older piping, which goes to the boiler (only gas in the house).
I wanted to get the new and old piping put together nearer the floor, as at the moment as you can see from pic the new pipe is feeding in, going up and joining to the old pipe and is now in the way of where I wanted a waste pipe to go. My question is could the new and old not of been fitted together further down, I’ve been told it couldn’t as the older pipe is not round anymore so it would of been impossible to fit, hence why it’s joined further up where the old pipe is still round, can pipes not be made round again or soldered on?
Also is earthing correct, going from electricity meter to gas pipe then on to cold water pipe?
Please be kind
Sorry if I sound completely stupid, but just after advice.
Had gas meter moved outside and the new copper piping from meter feeding back through in to the wall, this new piping has then been attached to some older piping, which goes to the boiler (only gas in the house).
I wanted to get the new and old piping put together nearer the floor, as at the moment as you can see from pic the new pipe is feeding in, going up and joining to the old pipe and is now in the way of where I wanted a waste pipe to go. My question is could the new and old not of been fitted together further down, I’ve been told it couldn’t as the older pipe is not round anymore so it would of been impossible to fit, hence why it’s joined further up where the old pipe is still round, can pipes not be made round again or soldered on?
Also is earthing correct, going from electricity meter to gas pipe then on to cold water pipe?
Please be kind
