Search the forum,

Discuss 1000mm ideal flue stockist? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
Anyone know where I'm most likely to be able to get a 1000mm ideal flue tomorrow?

Thanks.
 
screwfix or city's will have them
 
City's should have it defo in stock as it's on offer this month (logic)
 
Fingers crossed, or it will be another night with no heating.
 
Atyours ?
 
What's wrong with the existing flue?
 
Standard horizontal flue is about 75mm too short. New boiler fitted today, my oversight.

Final connections in the morning then test. Will be gutted if I can't get one tonorrow.
 
Standard horizontal flue is about 75mm too short. New boiler fitted today, my oversight.

Final connections in the morning then test. Will be gutted if I can't get one tonorrow.

Don't ideals have a teli flue ?

Or are you on about vertical/ lengths
 
Status
Not open for further replies.

Reply to 1000mm ideal flue stockist? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
199
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
253
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
139
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock