Search the forum,

Discuss I maybe missing something in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
looked at a customers boiler today , shes just moved in and cant figure out the control, me also .
Its a logic with a Honeywell programmable stat and a internet stat thing called cosy ( honest ) .
Should she have both ? Or am I missing something , can the two be wired together ?
 
I just googled it and it says installed alongside your existing control
Never seen one before
 
"A fully working central heating system controlled via one thermostat."

I would say no how are they wired Cosy to prog stat or both independently?
 
Last edited:
  • Installed alongside your existing thermostat. This means Cosy can move home with you and you can revert back to your original heating controls if you want
From amazon
 
  • Installed alongside your existing thermostat. This means Cosy can move home with you and you can revert back to your original heating controls if you want
From amazon

Cheers guys , amazon lol , says it all
 
Does it look like this ?

IMG_2983.PNG
 
Status
Not open for further replies.

Reply to I maybe missing something in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
115
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
251
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock