Search the forum,
Questions and plumbing advice in the Water Underfloor Heating Advice - .

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

Water UFH Installers Directory

Water Underfloor Heating Installers Directory. Here we help you find professional expert water underfloor heating installers in our free to use directory. Always use this forum as part of your own research. We can surely find you a water UFH installer with lots of references to check etc. :)
Threads
2
Messages
13
Views
6.8K
Threads
2
Messages
13
Views
6.8K
Hi! I have mostly underfloor heating in my house and one new radiator and two old. A bit of metal pipes and three manifolds, but mostly PEX-pipes. The heat source is a Vaillant FlexoCompact 88/4 heatpump. The plumbers which installed the heatpump added Elysator Sanol (cleaning agent) and...
Replies
0
Views
648
  • Question
Hello, I have a gas boiler in my apartment that heats a net area of 300 m2 with an underfloor heating system. The boiler has a capacity of 45 kW. There's no issue with the heating system, but I want to increase the hot water capacity. I plan to connect an external 200-liter boiler. How can I...
Replies
3
Views
411
Bit of advice needed. Searched but couldn't find anything about Combi's and UFH with no rads. Customer wants to have a combi, UFH but no radiators. Is it a good idea to have a single radiator on the system to provide a heat dump? Or should an auto-bypass suffice? If an auto-bypass then close...
Replies
2
Views
1K
I live in a property where underfloor heating was already installed by a previous owner. No manual was left, not even sure of the model/setup of our system (other than the fact that it’s a wet system linked to my boiler/central heating system & I can see these pipes behind a cupboard). It is...
Replies
5
Views
1K
R
hello newbie diy-er here looking for some guidance please :) gas boiler (downstairs) was connected to underfloor heating pump and valve (attic, along with hot water storage tank), coming on with the hot water the wiring between the two has failed - cable was exposed to water leak - so now I...
Replies
1
Views
670
Deleted member 120897
D
Hello I hope everyone and their families are ok at this time. During my own self-build I have to build a small living space (in a garage) two-story for myself and my family of 5 for 1- 2 years before I finish the full-size house. it is temporary but will be approx 30sqm meters downstairs with...
Replies
0
Views
767
C
I spotted this dark stain on my wood floor around 3 weeks ago, last time the underfloor heating was on was in December. Yesterday I switched it on again and it seems to be getting bigger. The stain is dark, no cupping or crowning, no sign of water or moisture. Any ideas whether it's a chemical...
Replies
3
Views
976
Hi, Having wet underfloor heating put in and been doing some reading, think pipe spacing is going to be 200 but read somewhere 100 from walls & sliding doors/bi-folds - is that correct ? What distance would people recommend from kitchen units ? I have a run against one wall and then a 1200...
Replies
13
Views
2K
The UFH feels a bit patch in a few of the rooms so investigated the UFH controller... What's this red stuff and should I be concerned about it?
Replies
9
Views
2K
A
Hello I've got a wet ufh heated by gas boiler. Is it possible to connect an indoor electric heat pump or heater that would fit in the utility room cupboard and be used during the day when solar panels are generating excess electricity?
Replies
2
Views
710
Currently installing air to water and underfloor.theres this expansion like vessel with two 3/4 iron male threads on top and bottom of it with no bladder on between.its goes before the primary flow hits the cylinder and underfloor manifold.anyone know of its function??we don't do alot of air to...
Replies
8
Views
1K
Hi, I have 5 bed house with underfloor heating on all 3 floors.I also have converted attic. UFH was installed in year 2000. I want to put low temp rads in attic (it currently has no heating!) and feed water from UFH on floor below. Question 1: Is this a sensible approach? Question 2: Is this...
Replies
4
Views
1K
Hi I have a 4 zone / 7 loop UFH system. 2 zones (4 loops) always get hot when the system is on when the zone thermostats and actuators are off. The video posted shows when I turn on another zones the flow meters drop. (Kitchen prep and kitchen TV are the issue, two at either end of the...
Replies
14
Views
1K
Just wondering if there are any issues with adding water to a UFH via the boiler filling loop… reason being wanting to flush out some gunk from a loop and ventilate but don’t have access at the moment to proper hose connection adapter so I can plug mains water at the manifold. Was thinking to...
Replies
3
Views
2K
Hi there As you can see from the video below, our pump exploded. The question I have is, this pump is added to a firebird condensing boiler and when we found this mess the boiler and pump were stil operating but the pressure in the boiler was reading 0. Should the pressure switch have kicked in...
Replies
2
Views
420
Hi, I have a Grundfos UP15 42RUC7 circulator which doesn't appear to be working. the impeller moves freely when I spin it manually but when there is power tot he device all I hear is humming but the impeller doesn't turn even though it does not appear to be stuck. Also, oddly I can not find my...
Replies
6
Views
2K
Hello, I'm looking at installing a new central heating system with UHF on the ground floor and normal rads on the 1st Floor. The design was initially to have at its heart an Ideal System Boiler and a Telford Tempest 500l Indirect Cylinder but I'm considering changing/modifying this design to...
Replies
5
Views
1K
So vinyl instructions say limit is 30c, but that means it'll take longer to get the room hot, which i don't wanna wait. But I also don't wanna destroy the new vinyl I've just laid. So I thought why not test it. I have a sous vide machine which will heat water to a consistent temperature, I...
Replies
11
Views
1K
Hi folks, this is probably a simple thing I'm missing but I don't want to force and break anything. i have a 7 port manifold from Underfloor Heating Manifolds c/w Iso Valves, Flow Meters, Gauges, Fill & Drain Points | VPS Underfloor Heating -...
Replies
5
Views
3K
I have Heatmiser slimline thermostats installed in most rooms which have water uhf zones. They work fine but I’ve always thought the current temperature reading was a bit off. I confirmed this today by placing a few internal room thermometers in various places and it appears the Heatmisers are...
Replies
1
Views
2K
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock