Search the forum,
Questions and plumbing advice in the Water Underfloor Heating Advice - .

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

Water UFH Installers Directory

Water Underfloor Heating Installers Directory. Here we help you find professional expert water underfloor heating installers in our free to use directory. Always use this forum as part of your own research. We can surely find you a water UFH installer with lots of references to check etc. :)
Threads
2
Messages
13
Views
6.7K
Threads
2
Messages
13
Views
6.7K
Need some advice and help! (I am not a plumber so will try and give as much info as i can) I have a room in my house with 2 loops of ufh in it. They are controlled by the same thermostat. They have separate actuators at the manifold as well. When the heating comes on one actuator opens fully...
Replies
6
Views
4K
Boiler: Valiant Ecotec 832 UHF (new): 2 zone mixing manifold, Heatmiser Neo Air thermostats x2, Heatmiser UH8 RF (wireless) wiring centre Central Heating (existing): Netatmo radiator valves connected to Netatmo thermostat and boiler relay Other (new): Two Honeywell motorised valves - 1 for CH...
Replies
4
Views
4K
Hello I hope everyone and their families are ok at this time. During my own self-build I have to build a small living space (in a garage) two-story for myself and my family of 5 for 1- 2 years before I finish the full-size house. it is temporary but will be approx 30sqm meters downstairs with...
Replies
0
Views
765
Hi all, I've just had my wet UFH connected up and turned on for the first time in my new extension and I've got a couple of questions: The screed was laid 6 weeks ago and my floor finish tiles haven't been laid but I'm looking to get them laid in about a week, so would like to spend the next...
Replies
11
Views
3K
Hi, as part of an extension/refurb project I will be fitting UFH over a new concrete floor as well as existing joisted timber floor. Both floors being within the same room. My question is whether anyone has done this mix of subfloors before and noticed a performance/temperature difference...
Replies
3
Views
3K
Hi, I have a Grundfos UP15 42RUC7 circulator which doesn't appear to be working. the impeller moves freely when I spin it manually but when there is power tot he device all I hear is humming but the impeller doesn't turn even though it does not appear to be stuck. Also, oddly I can not find my...
Replies
6
Views
2K
Apologies if its already been covered. I've been asked to quote on a heat only with a solar compatible unvented, the existing system is 10mm microbore gravity fed to rads. I'm confident of the conversion and have my gas safe and G3, I've also been been asked to provide an outlet for, and install...
Replies
8
Views
1K
Hi .there, can anybody give me advice on how to set up this digital clock. My ufheating is not working and I am trying to figure out if it is the timer or the pump. The pump will get very hot and the pipes over the thermometer will also get hot, but as soon as I turn on the radiators for the...
Replies
4
Views
1K
My Altech CPS 130-5 has stopped working and plumber said he can’t find this pump anywhere! Is this product still being made as it was installed about 10 years ago? Can anyone advise where I can buy it or recommend a similar product? Otherwise the whole ‘kit’ needs replacing and I’m trying to...
Replies
1
Views
3K
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock