My bathroom tap is dripping water, I want to change the tap valve, but I don't know the valve size, if somebody familiar with the type of tap, please tell me the valve size. Thank you in advanced.
My Superfire 2 is now leaking gas from the pressure relief hole ( just below the trigger).
It is 14 months old and looks like new. The previous one did exactly the same but i think I got about 3 years out of it.
I spoke to Rothenberger . They tell me they wont warranty their torches if you...
Hi all. I hope you are keeping well.
I just had all my hand tools pinched from the side door of a house as I was packing up. Probably about £300 worth. Is it worth claiming on my insurance or as it is only £300 just pay for new tools. Would my premium go up that much is basically what I am...
Does anyone out there have a JTP shower or JTP taps installed? (previously known as Just Taps Plus).
Have you found a JTP shower and taps durable and reliable for years after installation? And straightforward to install?
JTP is being offered by a number of our local bathroom retailers and...
I'm trying to find a spindle pin for this bender. This is the 19mm pin which goes through the quadrant bit then the bender frame, the bending arm, and out the other side. Irwin UK have told me this is only available as part of the quadrant assembly (Part No.T220H in their catalog, or part H in...
Hi Guys,
I run my own firm and always struggle to find good dust sheets like the British Gas ones.
Heavy cotton in a colour other than cream with company logo at a decent price is all I’m after!!
So I’ve decided to source and make my own version and just wanted to get a idea if people would be...
Is there anyone out there recognise the manufacturer of the shower mixer valve , there is no markings on the leaver or brass work. It has started to leak around the barrel. Thanks
I don't live near a city and need to figure out how many rods of 56% I need to solder 3" copper to copper and come copper to stainless steel. I thank you for your time.
I need to replace 13 TRVs due to sticking issues, I saw that Honeywell do a tool to remove and exchange the TRV inserts', this will save me draining the system and saving time, anyone know where I could hire one from?
Cheers
Evening all,
As per the title does anyone know where I can source an extension bar for hole saws?
Scenario today: using 54mm hole saw through approx 300 mm wall made up with plasterboard with a ply backing, cavity, a layer of osb, insulation and then a brick outside wall
(Obviously aware you...
Anyone used the nylon guides eg
https://www.benditnow.co.uk/product/b1522pg-plastic-guide-set-15-22mm/
Say there more durable than the alu ones any thoughts ?
Hi guys just wondering is there a drill pump or something that I can attach to pressure test when I'm on new builds. Currently using the rothenberger pressure test pump but that can take a while to get up to pressure pumping by hand. Thanks guys.
Hi guys had to open a new account not sure what happened to my old one.. Is there a drill pump out there that can pump up my 1st fixes for pressure tests? As doing it by hand can take a long time. Thanks.
Hi, I have a Hansgrohe T30 thermostatic cartridge (98282000) that I need to clean or replace, but I can't remove it. I've spent ages Googling this, but I just can't find the right tool to help - it's probably a custom Hansgrohe tool. Can anyone guide me? Thanks!
Never seen that type of ratchet wrench before...
https://www.youtube.com/shorts/G9BhDrQPKAU
Could be useful, Amazon sell singles of large sizes...
https://www.maxrpm.de/BGS-Line-Ratchet-Wrench-Set-6-pcs-BGS-8665?curr=GBP&opi=95576897
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.