I get called out to alot of urinals , I'm considering purchasing the milwuakee m12 drain cleaner, has anybody got experience with them or can you recommend another tool for the job ?
Thanks
I am trying to undo the non return valves on my shower to clean them but they won't budge, I guess there is a tool for doing this but can't find one on line - help would be appreciated!
It's basically a very wide slot but my largest screwdriver does not do the trick, the maintenance instructions...
I am trying to undo the non return valves on my shower to clean them but they won't budge, I guess there is a tool for doing this but can't find one on line - help would be appreciated!
It's basically a very wide slot but my largest screwdriver does not do the trick, the maintenance...
hello all
I am looking at getting my kit started as my boss has given me loax Ash and I have some. Does anyone have any tips on wefd to head to looking at all hand tools and power tools so was hoping to get a good deal thanks
Hi all where can I get a aco 202 serviced/ repaired and then callabrated, having a real pain trying to find someone to do this,for such a well know tool thanks
Hi
I’ve purchased a basin mixer tap for my bathroom.
trying to install the tap and can’t find a tool to fit the nut that holds the tap in place. I’ve tried one of these and it doesn’t fit. To small.
https://www.NoLinkingToThis/p/basin-wrench/13294
I’ve got a diagram of the tap, need to know...
I'm looking for a hole cutter or hole punch that you would use to cut a hole in a stainless steel sink for the waste to install into. Standard hole punches between 40 and 100mm for use with a hydraulic hand tool are available but I need a punch that makes the recess as well or a separate...
Hi guys. I’m currently doing some site work and as I don’t leave my tools on site I’m looking for a good tool case/box on wheels if possible. Have any of you lot got anything you’d recommend? Cheers
I've a few bags all set up for different job types and all but my hot works tote all well past their use by date.
I tend to stick to Stanley because my merchant always has a good range but I'm never entirely happy with the way they keep heavy items like grips etc in place.
Now a friend...
View: https://www.youtube.com/watch?v=i3ae5gPyLhQ
I like it...needle bearings everwhere, less stress on the hands, rock hard cutting wheel + spare, one size required and no pipe deformation.
Never really bothered too much with my manual swager but quite like this quick and tidy result, available in new year apparently.
Nicked off Pb Plumber's instagram account, hate that guy....guns too big and van far too tidy, clearly plenty of time on his hands :)
I know this is off topic.
However my car petrol door/ cover has come off. It needs gluing back on. I have tried gorilla epoxy glue. But it keeps falling off. It's plastic that I'm trying to glue.
Any help would be grateful.
Thanks
Can I get Newteam Handle Chrome 911m SP-075-0015-C either new or used anywhere in the UK or any part of the world? If not is there an alternative?
Thanks.
What's with the lack of sds max adapters for diamond cores.
I see countless sds plus bits as well as sds plus to keyed chuck adapter but I can't find any sds max bits.
Any one any ideas
Hi guys
I have been asked to install a new electric shower at a property. The customer is saying her old one has no power. She has a combi boiler so can’t fit a power shower and the original shower only has a cold water feed.
I am looking at investing in a rothenburg flow cup.
Are they any good...
Hi all,
I'm a novice so go easy ;-)
I have a Rothenberger SuperFire 2 torch and would like some advice as to how to safely remove the tip from the gas canister as it is advised to store them separately when not in use? The advice slip says when storing, turn the control knob to the ON...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.