Search the forum,
Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

  • Question
2 years ago I installed a Baxi 836 and every year the owners complain about the water temperature. Last year I couldn't find anything wrong but this year there's definitely a low-temperature hot water output. Although this is usually a warranty claim I'm having difficulty with this as I messed...
Replies
3
Views
787
Hi I’ve got a couple of gas safety checks coming up and I’m a bit confused as to whether I need to tick yes or no to the appliance serviced part? Does a landlord cert count as a service or does this mean has the appliance been serviced within the past year? Many thanks
Replies
13
Views
2K
Replies
1
Views
600
Hi, I want to add inhibitor into towel radiator for the heating system. I saw from Youtube that people normally open the radiator vent plug from bottom, either left or right (photo 4 and 5). But I saw someone opened from top which looks easier. Please see the attached photos 2 and 3, should I...
Replies
11
Views
1K
Hi Guys, Got a problem with a Baxi Solo 3 PFL50 The "pilot on" light is on permanently It was intermittent, but is now permanent When this happened, the boiler would not go through the normal start-up sequence Turn on the control and the 'boiler on' light comes on, but goes no further I...
Replies
2
Views
830
What is the ideal pump size for Vaillant ecoTEC Plus 400 15kW Heat Only Boiler? The property is a studio with 1 large room, a small kitchen and a small bathroom. I've been advised to use Grundfos UPS3 15-50/65-130.
Replies
1
Views
690
Is Britherm pump a better choice than Grundfos for Vaillant ecoTEC Plus 400 15kW Heat Only Boiler Wiring is SPlan and the intention is to install Grundfos UPS3 15-50/65-130
Replies
12
Views
1K
Hi, I’m changing my kitchen and swapping from a gas hob to an electric induction hob. Rest assured, I have no intention of doing any work at all on the gas supply, I just have a question. Assuming we might want to go back to gas at some point in the future, it may be worth leaving an easy...
Replies
1
Views
771
My renewal is over £500 for £2,000,000 cover. Domestic plumbing, heating and gas. Nothing unusual or nitch. Never made a claim, excess £1000. 20yrs with same insurer does this sound about right? How much should i be paying, current quoter originally recommended by institute of plumbing. Cheers.
Replies
0
Views
815
Hi apologies of this has been asked before but when you gas rate an appliance and trying to compare to the technical data, do you go off the Domestic hot water input as that’s a higher figure than the central heating max? Thanks
Replies
6
Views
787
Deleted member 120897
D
Vaillant ecoFIT 415 open vent heat only boiler. For wiring the boiler and pump, should I use the 3-way wire switch" solution OR a "remote switching" solution? The pump and copper tank are situated about 25ft from the boiler. I've been told that the 3-way cable solution doesn't work well with...
Replies
6
Views
853
hello After an engineer serviced our intergas boiler, the pressure was going down continuously. He told us that the prv was faulty and quoted us £200 to have it replaced, so we asked around and the last engineer told us that the pressure vessel, PRv are both faulty and the filling loop is...
Replies
7
Views
1K
Vaillant ecotec boiler loses pressure when hot water is on and does not work. But heating is working fine with normal pressure . Help plz
Replies
1
Views
810
Hello, I have a Vokera Excel 29 gas boiler which is losing pressure. I need to drain the boiler in order to repressurise the expansion vessel back to 1 bar. Can anyone explain how to drain this boiler? Thanks
Replies
1
Views
666
Deleted member 120897
D
My boiler was installed in July 2021. As my boiler is in garage, I didn't notice how it sounded when it started. A few weeks ago, when the boiler just started, by chance I went to garage looking for something, I heard the boiler was very loud! Much louder than when it is in operation for a...
Replies
7
Views
797
Hi just been to check a family members boiler and I’m getting just over 25mbar working pressure at the meter and 22mbar inlet pressure at the boiler. Standing pressure is 29mbar and done a tightness test and that is all fine. Also did a gas rate and it’s only only showing as 22kw and the boiler...
Replies
9
Views
1K
Hi everyone My name is Daniel and I've recently completed my ACS gas engineer class room based work. I need to complete my portfolio. so is there any gas engineers out there that are willing to help me complete and give me some experience mentoring me? I'm willing to pay, work free of charge...
Replies
7
Views
2K
Is it me or is there a shortage of boilers.
Replies
3
Views
767
Hi all, just this morning seem to have a new problem to us with our Rayburn. Oven and central heating all operating as normal, however we have no hot water from any taps. We would normally hear the Rayburn kick in when hot water is demanded… however it is not. Any help hugely appreciated
Replies
0
Views
878
Hi all, The day before yesterday early morning (23rd of Jan) the temperature was very low, about -7C, so before that, I set timer to start CH for 6-8am to prevent the cold weather freezing the boiler. BUT, by 6:40am I woke up and didn't hear the pump noise. I went to see the timer which was not...
Replies
2
Views
754
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock