Hi all,
Just had a Navien NCB 40kw combi installed by an approved fitter. The DHW rates of the boiler seemed promising on paper - 16.4lpm at a 35 temp rise and 22.9lpm at a 25degree rise. More than adequate for what we need. The only issue now its installed is that I'm not getting any more than...
I currently work in an office job on mid 20's salary and hate being chained to the desk.
Looking for a career change to become a gas and heating engineer.
I have came across various courses which offer retraining such as the below...
My testo 300 today when commissioning a new install would only give a reading of 21.3% o2 for flue integrity, tried zeroing outside but stayed at 21.3 tried turning on and off still the same. When in the flue gas test port it would go down to what you would expect and 5.3. Anyone have any ideas...
Just had a call from my 94 year old aunt (lives on south coast)
Today had a annual gas service. Many years ago very large room dividend in two plastered stud wall pair of doors in middle doors never opened (but could be)
Gas fire in each room, engineer has disconnected one fire saying you...
Can someone tell me what is the correct or legal requirement for us gas engineers if we are fitting a new boiler or doing anything to the gas line and find that the meter has an Anaconda on both inlet and outlet ? Is it a legal requirement for us to change it or what category would it be given...
I do this quite a bit but just wanted to check with you guys and see where we recon I stand if it goes wrong.
I quoted for boiler replacement without upgrade of gas supply to 22mm and quoted separately for upgrading pipe 'if required'.
When commissioning I dumped the digital gauge in favour of...
Hey,
I'm a new entrant and I've just completed my 2 year training course and have my final week gas assessment next week. I was just looking for some advice on what I can expect? (I'm not asking for answers or cheat sheets, just what the final assessment week intales so I can be best prepared)...
Ermm I'm a TADO virgin so be gentle with me. What black magic is this, how tf does the wireless stat talk to the boiler when there's no receiver in the starter kit?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.