Search the forum,

Discuss Your labour charge please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

hammers4spanner

Plumbers Arms member
Plumber
Gas Engineer
Subscribed
Messages
7,712
Evening all how much would you guys charge to replace main hex on ideal logic.
Labour only please
 
2 hours so around 70-80 plus parts and chems
 
If it were me, taking in the currency conversion rate, I would be charging those above mention rates per hour + parts & chems.

You have to warranty your work, allow for a call back if something goes wrong - unchargeable, and so forth.
 
I charge £45 for the first hr & £30 an hour after that.
So I would allow 1hr to flush with X800 & 2 hrs to fit new Hex and add X100.
Main Hex £350
Cleaner X800 £22
Inhibitor X100 £15
Labour 1hr for X800 cleaning £45
Labour 2hrs to fit new hex £60

Estimate Total Mats & Labour £492
 
Status
Not open for further replies.

Reply to Your labour charge please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock