What’s the right fitting

[Old Account]

Hi lads,

I wanted to ask you where to get a fitting for the condensate pump ( hose ) into the standpipe waste pipe?

I just need to connect the hose into a fitting which fits onto the standpipe.

Does anyone have solution what to use?

Kind regards,

Ron

 

[Welder]

In the past, I've just used a rubber grommet as the condensate discharge was a 10mm OD hose

 

[Old Account]

Right, that would be one of a solution. However, my rubber hose is about 15mm thick.

Link is attached what type of pump I have used.
Boiler Condensate Pump | Trade Only Plumbing & Heating Supplies

Does anyone else’s know a way of connecting it?

 

[ShaunCorbs]

They come with an adapter

Pump House condesate pump adaptor 3/8 to 22mm | Wolseley

Then a reducer from overflow to 11/4 or 11/2

 

[Old Account]

They come with an adapter

Pump House condesate pump adaptor 3/8 to 22mm | Wolseley

Then a reducer from overflow to 11/4 or 11/2

Thank you!!
Basically, solvent glue the reducer and the connector together and tighten the hose with a jubilee clip.

 

[ShaunCorbs]

Thank you!!
Basically, solvent glue the reducer and the connector together and tighten the hose with a jubilee clip.

Correct

 

[Scott_D]

Ask in the merchant for a fallopian tube.
They will know what you need

 

[Old Account]

Ask in the merchant for a fallopian tube.
They will know what you need

Thank you scotti, Dont know what it is but will give it a go.

 

[Scott_D]

Thank you scotti, Dont know what it is but will give it a go.