Many meters were installed 20 years or more ago and it is increasingly common to find the isolation valve compromised. Local utility will normally attend within 72 hours but emergency situations at times dictate a more direct approach. What tools from the tool bag do others find useful.
Discuss Watermeters in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 3,132
squeeze off tool if you can get to some mdpe
- Messages
- 1,032
Freeze machine, proper electric one
- Status
Reply to Watermeters in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
- Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too.
I'll post this in the Australian forum now.
Hi, basic question, any insight much appreciated.
Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 1
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 1
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-
-