Search the forum,

Discuss Velta / Upnor 3D Installer Settings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

bobgarden

Plumbers Arms member
Plumber
Gas Engineer
Messages
74
Has anyone here had much experience with the old Velta (now upnor) UFH systems

I have a customer who has a few issue and i'm trying to find some info.
I've managed to download the settings doc to see the installer settings but not sure how to get into the settings menu on the Veltamat 3D unit.

The issue is the floors are not getting hot enough in cold weather even tho the outside sensor is showing lower temps. I was wondering what the curve was set to and hence looking for info on how to get to the installer settings.

Flow temp seems to be 31-35 and return around 30

any help would be much appreciated, thank you
 
Hi Bob
You didn't get much interest from the forum on this one!

Interestingly Ive been investigating similar today and found the manuals on the Upnor website. Did you fix your problem??
 

Reply to Velta / Upnor 3D Installer Settings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock