Unvented install on a combi

[magicno1]

Hi
I need to install an unvented cylinder along side a Worcester green star heatslave 12/18.
cust wants the boiler to supply hot water to the kit tap and the tank do a bathroom and cloak.
is it possible to wire the tank and zone valves back into the boiler to allow operation?
we will have a programmable room stat with the heating zoned and the hot water tank with a timer.
am I missing anything????

regards
Chris

 

[SimonG]

Nope not missing anything.

 

[magicno1]

Cheers

Wiring possible?

 

[Chalked]

Just convert it to a s plan. Timer fir hit water and prog stat for heating.

Tbh I think a combi with a pressurised cyl is the ideal solution. Water used during the day in the kitchen fed from combi and then decent flow to bathrooms fed from a cyl, timed for only a few hours a day.

 

[magicno1]

Great advice thanks guys appreciate it

 

[ShaunCorbs]

Should be fine but if you get any problems wiring it up just shout will draw you somthing up

 

[johnf]

Just check you have good enough flow and pressure on the water supply. Technically it sound.

 

[magicno1]

Should be fine but if you get any problems wiring it up just shout will draw you somthing up

Nice one! Cheers

 

[magicno1]

Thanks for all your replies and I'll post the finished article!