Search the forum,

Discuss trying to post a question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
68
hi all
Im trying to post a question in the heating forum but it tells me only 5 tags allowed, Ive added and deleted various words/letters but it still wont let me post, can someone tell me what i am doing wrong?
 
OK
I've got a glow worm ultracom store 35 which is discharging now and again on the dhw side, all relief valves OK new valve block fitted just after Christmas, exchanger descaled etc, only just started doings it, thermistor also tested on, any ideas please?
 
OK
I've got a glow worm ultracom store 35 which is discharging now and again on the dhw side, all relief valves OK new valve block fitted just after Christmas, exchanger descaled etc, only just started doings it, thermistor also tested on, any ideas please?

Who did all this work? Only if it was an engineer, get him/her back.
 

Reply to trying to post a question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
234
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
81
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
177
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
390
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock