Search the forum,

Thermostat problem help please

Post new thread

Discuss Thermostat problem help please in the Central Heating Forum area at PlumbersForums.net

R

rosied

Messages
2
Good morning, I wondered if someone could give me some help please. I have had a new boiler fitted and have a center thermostat but nearly every time I go to turn the heating on or off the screen goes blank. On the first one I had I had to completely reset the time date etc now I am onto the second unit and still am having the same problem. I changed from reducing the temp every time to just turning it on snd off. It has now started to come back on after a few seconds but still goes blank....cam anyone help please surely this is not normal. I have changed the location where I keep it but to no avail....can anyone give me any help please....
 

Reply to Thermostat problem help please in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
128
Lou
Lou
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Lou
Lou
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Firefox
F
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
199
mutley racers
M
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
250
Matt0029
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

BS 5389 Tiling Standards
Electrical Advice
Tilers Forums UK
Contractor Forum
Tiling Tools
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock