Search the forum,
  • Thread starter lenny
  • Start date
  • Replies 5
  • Views 2K

Discuss Thermodynamic in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Yes, probably one of the only systems to thrown off the MCS list, check out the web site.
 
well if its good enough for pop sensation Peter Andre it's good enough for me I shall now be recommending these to all my customers nowhttp://www.ultimasolar.co.uk/peter-andre-installation.php
 
well if its good enough for pop sensation Peter Andre it's good enough for me I shall now be recommending these to all my customers nowhttp://www.ultimasolar.co.uk/peter-andre-installation.php

Haven't a clue who he is or why his kids call him father of the year :)

Seriously the second photo should be titled "How to ruin the appearance of a lovely house"
 
Status
Not open for further replies.

Reply to Thermodynamic in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
273
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
221
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
224
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
9
Views
280
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
Replies
39
Views
624
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock