Search the forum,

taco 504 relay on a rheem combi boiler

Post new thread

Discuss taco 504 relay on a rheem combi boiler in the Central Heating Forum area at PlumbersForums.net

C

concegual

Messages
1
When I run TT through the relay no heat activation. When I by pass relay to a single thermostat works as intended. Triple checked wiring seems correct.
 

Reply to taco 504 relay on a rheem combi boiler in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
224
ShaunCorbs
ShaunCorbs
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
324
Matt0029
M
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
275
oz-plumber
O
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
171
John.g
J
SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
227
SnosRap75
SnosRap75
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Blog
UK Tiling Forum
Tiling Tools
Electricians' Talk
TilersForums.co.uk | UK Tiling Forum - Est 2006
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock