Search the forum,

specialist old boilers needed

Discuss specialist old boilers needed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mattcrowe

Hi all, please forgive me if i get anything wrong as i am new to this forum and not a plumber/ gas installer. We deliver apprenticeships in the Staffordshire region and are on the look out for three items: Types needed -
An Open Flue Boilers – Wall or Floor Standing
One x Positive Case Seal Boiler
Gas over sink water heater
 
It might be best to post a location, and a list of positive case seal boilers.
 
Thanks for the reply we are based in Stoke-On-Trent in Staffordshire as mentioned in my first post. And i am just waiting for the list right now.
 
Welcome along :)

Get yoursen down the pub just before closing, you'll be stowed out.
 
I do have a list now but it wont let me upload for some reason. if you think you can help you could always pm me..
 
I'm not that good at if myself. You could take a picture, and then hit the go advanced button and upload the pictures.
 
Or if you want you could email me the list and I can post it up for you
 
Leo21 already tried that, thats where it wouldnt work. ShaunCorbs i will do it now..
 
Here you go

image.jpg
 
Last edited:
Status
Not open for further replies.

Reply to specialist old boilers needed in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
174
exedon2
exedon2
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
202
Dave Moore
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
116
ChrisGid
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock