Search the forum,

Southall UB1 Engineer needed to look at my UFH/ anti cycle issue ASAP

Discuss Southall UB1 Engineer needed to look at my UFH/ anti cycle issue ASAP in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

kash

Messages
74
Hi

Looking for someone to be able to come out tomorrow if they can (19th Feb) to try and resolve an antiycling issue being caused by my UFH (i think).

I understand it could be to do with balancing but not sure...

Basically, whenever my UFH is on, afte several minutes my boiler enters anti cycle mode.

I posted the topic below which will have a bit more background.

www.ukplumbersforums.co.uk/central-...e-help-water-ufh-anti-cycle-2.html#post857406
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Southall UB1 Engineer needed to look at my UFH/ anti cycle issue ASAP in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

W
Is this Low Loss Header suitable?
I am looking to replace my existing Vaillant heat-only boiler with a new Vaillant ecotec plus 630 system boiler (30kW). I have a megaflo hot-water cylinder, a central heating system (serving 21 radiators) and an orangery built last year (6m x 4m) with underfloor heating. Through running some...
Replies
2
Views
500
windsor-tg
W
Dale_R
    • Like
Recent house purchase - CH/HW Major issues.
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical, carpentry it's been never ending. The house was built by Barratt Homes in the year 2000, it is a 3 bedroom house called a Palmerston, the CH/HW system is a Y...
2
Replies
47
Views
5K
Timmy D
T
F
  • Locked
Looking for a Heating engineer specialising in UFH Specifically Wirsbo (East Herts)
I am looking for a heating engineer who specialises in underfloor heating and has experience with Wirsbo 20mm pePex (now Uponor) based UFH systems with older 1 1/4" brass manifolds. My self installed UFH badly needs servicing. The the springs in the actuators have broken/weakened so the water...
Replies
2
Views
2K
Fozzie Bear
F
K
  • Locked
Newbie help - water UFH Anti cycle with Valiant ecotech 831
Hi I'm Kash and im new here - looking for some advice/help. I'm sorry that my first post is one seeking help and not a general hello! I'm not too clued up so thought i'd post on here to get some feedback. I've used the search function and tried a few things but it hasn't seem to have done the...
2
Replies
36
Views
7K
xsjadofred
X
A
  • Locked
Help my family get warm please. cold water feed issue?
Ok a long story here. Ill split it up into a bit of background and where were at now. /Background/ We moved into a new house in February last year. A detached house a bit bigger than our old 1 bed terraced. It was cold. The heating was on about 4:30pm and things wouldn’t start to get remotely...
2
Replies
49
Views
7K
Andybrad
A
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock