Search the forum,

Solar Thermal Training

Discuss Solar Thermal Training in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
SimonG

SimonG

Esteemed
Plumber
Subscribed
Messages
21,055
Question for those in the know.

Is it best to get independant training or with a manufacturer, and if the latter who would you recommend?
 
SimonG said:
Question for those in the know.

Is it best to get independant training or with a manufacturer, and if the latter who would you recommend?
Click to expand...

Ihave fitted number of different solar systems and can safetly say in my opinion kingspan themomax are without doubt the beast as for training I would say go with a manufacture youwould be happy with fitting
 
Hi SimonG

If you are only intending to do installation work, then Gray0689 is absolutley correct but I would also say that if you intend to go into servicing and installing any solar system it might be worth doing an independant course.
 
Status
Not open for further replies.

Reply to Solar Thermal Training in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
SimonG
SimonG
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
276
oz-plumber
O
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
186
ShaunCorbs
ShaunCorbs
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
186
Thomas J Marshall
T
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
209
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock