Search the forum,

Discuss Sentinel Magnetite System Filter Vs Magnaclean in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rockinter

Hi,
I was wondering if anyone has used the Sentinel Magnetite System Filter and if it get rid of very small particles?

I am currently using the magnaclean, and it captures some of the dirt but the very small particulars get through and obviously get stuck in the heat exchanger.

Or do you think the fernox boiler buddy is better?

I looking for a filter which will remove particles as small as sand.

Look forward to your replies.

thanks in advance
 
Not used the sentinel but the magnaclean twin tech seems to catch everything, magnetic and non magnetic.
 
Status
Not open for further replies.

Reply to Sentinel Magnetite System Filter Vs Magnaclean in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
165
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
350
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
201
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
209
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock