Search the forum,

Discuss scrap copper in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
my scrappy pays by cheque too
 
You can get a cheque with no name on it, then take it to a shop that cashes cheques if you don't know a scrappy who still gives cash.
 
You can get a cheque with no name on it, then take it to a shop that cashes cheques if you don't know a scrappy who still gives cash.

that he told me too..

problem is, he will ask me how to spell 'noname'.lol
 
What a crock the 'new laws' are. Just seen a bit on the news this morning and as of today 'you will be paid by cheque UNLESS you are of no fixed abode'. Really clamped down there on the people they need to.
so dress like a hobo and make a few trips to the scrapyard.

im from South Africa & scrap is a BIG business here.

i also do it when im not so busy on the plumbing side.
at least here they only ask for ID- no licence stories(hope it stays that way)
 
Try not taking it in your van. That way it doesn't seem like trade waste.
 
You still need to show ID though and you can bet HMRC, Vosa and the environment agency will be looking for patterns. The best way to do it is to go legit with it. If you're in business chances are you'll occasionally carry rubbish so you should have a waste licence anyway. As for the yards not paying cash I think the government have got the public on side on this one after all the scrap metal thefts and a few overpaid plumbers moaning about the loss of a perk is not going to hold much sway.

It's happened, it's staying, live with it.
 
And don't forget to generate waste transfer notes whenever you move any waste also if you want to stay squeaky.
 
its much easier here, thank god.
if the govt had to tighten regulations, then most scrap dealers will suffer as the majority of their suppliers are unemployed people who collect scrap for a living and just barely have ID
 
just reluctantly applied for a scrap metal license. booo. Was going to take some in today but got all paranoid about it. Now i need to wait 15 days. just loaded up the van as well. Paranoia is a pig!
 
just reluctantly applied for a scrap metal license. booo. Was going to take some in today but got all paranoid about it. Now i need to wait 15 days. just loaded up the van as well. Paranoia is a pig!

Last time I weighed in the merchant asked me who I would like the cheque made out to, put it in the wife's name .that said I still keep a waste carriers license but never been asked to produce it in 4 years. I was stopped by Vosa a few weeks thought they were definitely going to ask but no !
 
Status
Not open for further replies.

Reply to scrap copper in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
167
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
108
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock