Search the forum,

Discuss Rothenberger heat deflector for torch in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I use the heat proof mats but I was on a job the other day and the custard had white walls. Sorry to say I made a right mess of them with flux and other marks over them. However I did touch them up afterwards as I had a tin of emulsion in the van. I may look into these as an alternative
 
I've seen them but never seen in action.

If I ever get a soldering job or any job I'll buy one!
 
Piece of stainless steel off stack of extractor hood etc, Thin enough to bend, rigid enough to stay in position and wet cloth behind for heat sink if required.
 
Status
Not open for further replies.

Reply to Rothenberger heat deflector for torch in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock