Search the forum,

Replace Aqualisa power shower to mixer shower

Post new thread

Discuss Replace Aqualisa power shower to mixer shower in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

R

Ruffstuff

Messages
2
Hi - I want to replace Aqualisa power shower to mixer shower to a std. mixer shower, however, the centres for the hot and cold are only 65mm. I’ve tried finding something that would be compatible but no joy. Ideal would be a mixer head with the same centres. Does anyone have any idea as to what I could use?
 
There was a similar question on this forum in 2012, and one on diynot a couple of years ago, and the replies to both concluded that nobody knew of any other shower mixer with 65mm pipe centres, and the only way was to modify the pipework.
 
If you’re not comfortable in adjusting the concealed pipework and you’re not too worried about looks.

You could get some chrome pipe/elbows and surface supplied bar shower wall plates like below.

76DA52EB-C66B-4028-84E1-67BABEA43133.jpeg
 

Reply to Replace Aqualisa power shower to mixer shower in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

M
Mixer mixer shower, compatible with tanked supply
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Replies
2
Views
101
Last Plumber
Last Plumber
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
195
SimonG
SimonG
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
112
Lou
Lou
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
123
Lou
Lou
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
250
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock