Search the forum,

Discuss Renault van and jetting machine for sale in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

Owen66

Renault Trafic TRV LL29 115 LWB, white, 58 plate, seven months old, 11,500 miles with air conditioning. Inside is fully racked out to carry tools, spares etc. Rear of vehicle contains a drain jetting system with a large shelf above for accessories. A vanguard pipe carrier and ladder carrier are included on the roof.

The jetting system is a Briggs and Stratton Vanguard 20hp/3000rpm model, 210bar/3000psi max operating pressure, 31Lpm and is also seven months old. The system was factory fitted by Flowplan and is still under warranty. All associated hoses and nozzles are included in the sale.

Cost approx £22k, will sell for £14k o.v.n.o.

For further information, contact Neil on 07970234969.
 
Renault Trafic TRV LL29 115 LWB, white, 58 plate, seven months old, 11,500 miles with air conditioning. Inside is fully racked out to carry tools, spares etc. Rear of vehicle contains a drain jetting system with a large shelf above for accessories. A vanguard pipe carrier and ladder carrier are included on the roof.

The jetting system is a Briggs and Stratton Vanguard 20hp/3000rpm model, 210bar/3000psi max operating pressure, 31Lpm and is also seven months old. The system was factory fitted by Flowplan and is still under warranty. All associated hoses and nozzles are included in the sale.

Cost approx £22k, will sell for £14k o.v.n.o.

For further information, contact Neil on 07970234969.

Hi guys,

The van and jetter is still for sale but I start a new job on Monday. I realise that I am not going to get what I originally wanted for it but if you know of anyone that is looking for a van and jetter, I'm willing to let it go for £10,500 for a quick sale!

Many thanks.
 
Status
Not open for further replies.

Reply to Renault van and jetting machine for sale in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
218
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock