Search the forum,

Rayburn 400kpf

Discuss Rayburn 400kpf in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Simon35

Hi all,
We recently moved house that has a rayburn 400kpf. There's a couple of issues I'd like to try and resolve. Firstly when turning the Rayburn on from cold, it runs for 2-3mins then cuts off as tho upto temp. Move the temp dial down then up it starts again. But only for a minute before it cuts off again. We have to keep turning the dial up and down to get it up to temperature. I've changed the temp stat but the problem persists. Secondly. Should the powerflu outside continuously run while the mains are turned on. It never stops on 24/7. Is this correct?

Hope someone can help!
 
Welcome to the forums Simon, there are experienced members who will be along to help, in the meantime do you have any service history of it?
 
Hi, no unfortunately not. Was told it had been serviced in the summer. But nothing to prove. It works fine just that it cuts out all of the time. As stated. Not Lockout. Just as tho it has reached temp.
 
Where about`s are you and the Rayburn Simon?
 
Status
Not open for further replies.

Reply to Rayburn 400kpf in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Glow worm Ultracom 24 firing issue
Went to a customer today their glow worm Ultracom 24 HE goes to fire up then cuts out turning the heating pump off, then does the same again before firing and running. Occasionally shows the flame is lit on display but flow temp doesn’t go much past 26. Then if you turn off and try again...
Replies
5
Views
302
MethodPH
M
N
  • Question
Water Heating Wont Work Unless Tank Thermostat Is Turned up and Down Manually!
Have a sytem boiler with unvented cylinder with 2 heating zones plus hot water in a house we moved into recently. To start with we were always amazed at the water pressure so on the odd occasion that the water was only luke warm it was easily forgiven, but over time we have come to realise that...
Replies
8
Views
371
Basher
B
mattgriff88
Vokera 15 vhe Boiler
Hi I have a Vokera 15 vhe boiler and all has been running well for the last 6 months since moving in up until a few weeks a go. Boiler throws up a flashing 79 code. Try restarting the boiler straight away but I have to wait 10 minutes for it to cool down before it works. I reset the boiler...
Replies
23
Views
968
Basher
B
R
Boiler kittling again after 2 yrs of fixing.
A bit of history first. 2 yrs ago visited a grant boiler with boiler and pipework kettling. I added SentX200 noise reducer. It is standard open vented system S plan Also found there was no bypass and this was an external boiler with frost stat so boiler would start with no valves open...
Replies
7
Views
714
John.g
J
E
Aqualisa Quartz 9.5kw Electric Shower - Only getting cold water?
Hello All, New to the forum so apologies if do any faux pas. But I have an Aqalisa Electric Quartz Shower 9.5kw (8 years old) and currently it is only giving out cold water regardless of where the temperature control is placed, the only difference is the more you move to the dial to the cold...
Replies
13
Views
1K
everson
E
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock