Search the forum,

Discuss problems with kitchen monoblock in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
Good evening,

Please can anybody help, I have replaced a sticky cold side of a kitchen monoblock with a new reviver. There was nothing wrong at all on the hot side. Having replaced the cold with no problems no more sticking.i turned on the taps the cold runs no problem but the hot nothing, but I have not touched the hot very confusing any thoughts would be very helpful thank you.
 
Did you isolate the hot side and haven’t turned it back on??
Is there some debris from the old cold valve which has been pushed through to the hot side?
Wrong depth cold valve??
Got any pics?
 

Reply to problems with kitchen monoblock in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock