Search the forum,

Discuss Possible Leaking Gravity Fed Hot Water Cylinder Valve in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
3
Hi all. This ‘valve’ is at the bottom of our domestic hot water cylinder.
Anyone have any idea what it is please? It must’ve been there for many years and seems to be leaking.
 

Attachments

  • IMG_0317.jpeg
    IMG_0317.jpeg
    79.8 KB · Views: 27
Last edited:
Would say a thermal valve for gravity heating of the cylinder eg closes the return off when it reaches x temp to save overheating of the water
 
The valve might actually be alright? But one of those things that you replace anyway as the pipes around it have gone so probably been in at least as long as the pipes. (Not a plumber myself so don't listen to me!)
 

Reply to Possible Leaking Gravity Fed Hot Water Cylinder Valve in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
125
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
231
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
132
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock