Search the forum,

Out tonight !!

Discuss Out tonight !! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
townfanjon

townfanjon

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,642
Orrible cold dark night up here in 'Gods own' tonight . Not going anywhere, so just for a change I will get the first round in .

anybody care to join me with a JD and coke ?
 
It`s chucking it down outside, a cheap brandy and coke would go down well jon, thanks.
 
Got anything low calorie? Kids going to a swimming party and I've gotta go too. Time to dust off the budgie smugglers!
 
I fancy a Peroni for a change seeing as my pal gave me two pint's for nowt...... lol regards Turnpin:17:
 
Opportunity to clear some of my reserve stock now onto a couple of these......regards Turnpin:yes: IMG_20160109_223642.jpg
 
Served at the Petwood hotel home of 617 Sqd. the Dam Busters! Nice pint.
 
Status
Not open for further replies.

Reply to Out tonight !! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
227
Chuck
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
287
Chuck
C
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
219
Chuck
C
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
245
ShaunCorbs
ShaunCorbs
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
461
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock