Search the forum,

Discuss nokia 6250 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jpm

I know it's a bit old hat but I had my 6250 for about 7 years and have replaced it with a sonim xp3.but i have a full handsfree car kit in my van if anyones interested.quite rare now and go for good money on fleabay.let me know peeps
 
I know it's a bit old hat but I had my 6250 for about 7 years and have replaced it with a sonim xp3.but i have a full handsfree car kit in my van if anyones interested.quite rare now and go for good money on fleabay.let me know peeps

Why did you go for the sonim and not the Samsung B2100 or B2700 jpm :)
 
Have you youtubed the sonim?If you have then you'll know why.I only ever buy the best tools for the job.I also have a cf-18 toughbook.Don't use it often but it's got more boiler manuals on it than i could fit in the van!
 
Status
Not open for further replies.

Reply to nokia 6250 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
433
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
135
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
116
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock