Search the forum,

Discuss Noisy boiler on warm up in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
43
I have got a baxi WM 30/ 3RS boiler. Recently had it serviced where the chap cleaned it and adjusted the gas, But since he did it every time the boiler starts from cold it makes a banging popping sound for about half an hour then goes quiet but it works fine. Any ideas what is causing the banging sound?

Thank you
 
might be worth asking him to come back due to the loud ignition
 
I don't know if its the ignition, it starts and lights ok, but its for half an hour or so after that. It seems to stop once the boiler and water is starting to get up to temp.
 
Status
Not open for further replies.

Reply to Noisy boiler on warm up in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock