I'll give him another call tomorrow.I suggest you get the last engineer back mate. He will be busy and difficult to get hold of. But will be worth it in the end.
Discuss New potential issue! in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I'll give him another call tomorrow.I suggest you get the last engineer back mate. He will be busy and difficult to get hold of. But will be worth it in the end.
He'll call me back later .I'll give him another call tomorrow.
Sludge will not block it that quickly if it is new.He'll call me back later .
Could it be that the valve is partly blocked with sludge? The first engineer after draining the system put some cleaner in the small tank to help clean out the system, as the boiler installation guy didn't flush system at all.
I’m not saying anything. Just going through the processesMy money is on another wiring Fault
I hope it's a simple thing , I've had enough of it now. How can it possibly go wrong within such a short time of it being fixed? I heard it wurr when he sorted out the wiring? The mind boggles!My money is on another wiring Fault
As I’ve said about 4 times though mate if (I know we don’t know for sure) the motor was receiving a constant power and was stuck in one position the motor could have worn very quickly I am amazed he didn’t replace the valve when he knew it had been stuck in one posotion
Woo lucky valve!Which we are pretty sure was getting a permanent love and is probably burnt out
Reply to New potential issue! in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.