Search the forum,

Discuss New ModeratorS Alert! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Lou

-
Staff member
Esteemed
Admin
Subscribed
Messages
1,028
There is no doubt that @ShaunCorbs has been doing a grand job on the mean streets of the forum, but we thought it was time for him to have a sidekick or two.

So please welcome @Riley andt he lovely @Harvest Fields to the moderatingteam!

**Applause**
 
Last edited:
Welcome to the slightly madder hatter club Riley
 
I have buttons!?!?!

giphy.gif
 
Well done sir and congrats on your appointment but frankly it does not come a moment too soon , I do not want to see Shaun's prolapsed arsehole again.

went to the docs today all nicely back where it should be
 

Reply to New ModeratorS Alert! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi Folks, advice needed here... I am a 51 yr old leak detection engineer/plumber 2 years into self employment which i am loving. To get going I bought a 61 plate transit which has been great but is now off the road for a few weeks at least - which now that i am established and making decent...
Replies
1
Views
385
Hi, I have a Y plan open vent system, boiler 30+ years old, and requires replacement. My plumber is recommending fitting a new Viessmann 11kw System boiler in the current boilers position. The problem is he plans to run two new separate pipes fro the boiler to the hot water cylinder. Once this...
Replies
5
Views
696
Hi everyone. Apologies - I'm new, but I promise to try and be an active member of the forum :) We're doing some decorating just now and it was suggested that we take off the radiators to make it easier for the plasterer. We decided to have a go ourselves rather than getting someone in for...
Replies
6
Views
906
I have just moved into a late 1990s new-build house with a small bore (about 1/2" OD pipes) gas fired boiler central heating system. All the normal radiators get hot but two of the three towel heater/radiators don't get hot and the pipes feeding them are cool to the touch even after the boiler...
Replies
4
Views
469
Hi everyone. Pilot light extinction problem on an old Myson Economist has been traced to a faulty overheat limit stat. It's a Ranco LM5P8037 which is now obsolete. It's a 2A 30mv 110 degree stat with a coil inserted into a pocket on the flow outlet. Will any other Ranco limit stat with similar...
Replies
0
Views
324
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock