Search the forum,

Discuss New Central Heating with 10mm pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

He is dropping pipes inside walls,so take it to outlet behind radiator and sweep down into chrome 10mm push fit elbows (screwfix] ,no joints in walls, very neat, hardly see any pipe at all, and clear floor for easy cleaning.

This is the best method, very tidy, plus stops the missus from bashing the pipe with the hoover. It’s what I’ve had for the last 15 years, as long as it’s fit right and flushed right then dosed with the right amount of inhibitor.... happy days.
 

Reply to New Central Heating with 10mm pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
113
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
226
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock