Search the forum,

Discuss My Solar Thermal Install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

Kev the gas

A few pics of my install eventually completed in November, working great so far even for this time of year.


IMG_1858.jpg
IMG_1863.jpg


And a pic of my dog Beau in case you were bored :bigear:


IMG_1873.jpg
 
Very neat install mate I like it
Always nice to look at a good set up respect
Here one of mine
518352c1-bf5a-4d13.jpg
 

Attachments

  • ImageUploadedByTapatalk1326563286.258739.jpg
    ImageUploadedByTapatalk1326563286.258739.jpg
    5.4 KB · Views: 71
Not my mistake I promise.

I tell the dog every time to put her Worcester Bosch Lanyard on every time we go out
 
Some times we have to think outside the box !

Having 4 kids, Wife and the Business I do sometimes :86:
 
nice fit kev and gray,failed to see the patriotic bit though kev,WB is von german
 
Red expansion vessel white cylinder and blue expansion vessel like it lol
 
Status
Not open for further replies.

Reply to My Solar Thermal Install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
Morning, Does anybody know what happens to a solar thermal flat panels (a pair on south facing slate roof) that have been unused for at least 12 months possibly year before also. System has been switched of due to loss of pressure. How will last years heat wave conditions have effected the panel...
Replies
2
Views
352
Hello My solar thermal system appears to be leaking fluid (pics attached). Could anyone give me an indication of what the issue is likely to be and the potential cost to rectify? The system was installed in May 2021 and has a flat plate panel on the roof. It works very well generally and...
Replies
1
Views
537
Hi, Solar thermal not so big these days but a couple of Q for anyone who still works in it. Background. I'm an Electrician not a plumber.. I've been maintaining my otherwise excellent solar thermal (Original install MCS by Others), for the last ~ 18 years, over which time I've needed to clean...
Replies
2
Views
899
Hi, I'm looking to purchase a 300L unvented indirect cylinder to work with a standard heat only boiler. I may have solar panels in the future, but likely the PV kind rather than the thermal kind, and won't be having heat pump in the future. So the cylinder would be connected to the boiler at...
Replies
9
Views
627
As I recently had my HW cylinder replaced and we had to leave disconnected the solar thermal system from the HW cylinder and drained out the old glycol. What is involved in re-filling the thermal system with new glycol in terms of number of hours of labour and materials? I got a quote for a bit...
Replies
6
Views
849
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock