Search the forum,

Discuss magnacleanse in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I got a demo jar in mine :tongue3:

Was it for a limited time only or did the packaging monkey drop it in by mistake I wonder ?
 
I got a demo jar in mine :tongue3:

You have no idea how much better that makes me feel. I was certain that they came with demo jars - and yours wasn't that long ago Nostrum.

I was starting to think that I was losing my marbles.

Ray
 
Bearing in mind what Sam said in post 73, would you mind having a look in your unopened one Killy Bing, and seeing if there is one in there?

Ray
 
Hold fire, will see if i can make adey cry and send me one out for free first.

i managed to get 50 seal kits out of them easy enough....

they do seem very keen to give away freebies with a bit of leaning on
 
Bearing in mind what Sam said in post 73, would you mind having a look in your unopened one Killy Bing, and seeing if there is one in there?

Ray

Will go open it up.

haha riley, i tend to be able to get discounts or freebies out of pretty much everyone.
phex show i walked away with two bags and a rucksack full
 
Will go open it up.

haha riley, i tend to be able to get discounts or freebies out of pretty much everyone.
phex show i walked away with two bags and a rucksack full

loving your work when I go to shows I grab all the freebies going then get home n look at it and think wtf bin 3/4 as it's tat :wink:
 
Was there a demo jar in your's Matt, or did you blag yours from Adey?
 
Mine was bought in October, Ray. November if Adey are reading this as I had to bend the truth slightly to get my free Pro 2 and chemical pack.
 
What does the seal kit include? Does it fit the pro 2 and original?

The large o ring for the screw down body, pretty sure its good for both.
and a small o ring for the bleed i think, will have a look.

ring up, say you have fitted x amount and some are leaking.
 
Status
Not open for further replies.

Reply to magnacleanse in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
113
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
167
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
206
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock