Search the forum,

Discuss Lost this job as I was to expensive in the Plumbing Jobs | The Job-board area at PlumbersForums.net

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
IMG_9074.JPG

Lost this job to an unregistered installer. I know who fitted it but you can imagine the stuff you cant see when the condense run on full view is that bad on the outside of the house
 
View attachment 37055
Lost this job to an unregistered installer. I know who fitted it but you can imagine the stuff you cant see when the condense run on full view is that bad on the outside of the house
I lose a lot of jobs due to these people or being cheap and cheerful with Ā£150-200 labour charge.
No cement around the flue
Wrong condensation pipe
Just knocked through wall
Wrong install of flue
No collar around the flue
Left old flue at roof
Left bricks at the roof

The. You start thinking what has this cost and whatā€™s the install inside

783BC209-2ABB-4EB0-A75A-DCA6D971A1A5.jpeg
 
Canā€™t agree more with you..
Could I report the above install too? It seems to me itā€™s not done right as well as makes my eye cry..
Would you call gas safe to let them check this
You need the home owner to call
You can report someone who is working illegally
 

Reply to Lost this job as I was to expensive in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
140
Hi. I need a new toilet supply line but donā€™t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
167
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
174
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
218
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
199
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock