Search the forum,

Discuss Looking for plumbers mate work to start May Bath/Bristol/Somerset/Wiltshire area in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

AndyRG

Hi Guys

Quite a bit premature but I have my City & Guilds 6035 starting next month for 6 weeks and then my NVQ level 2 placement due to start End of April so if all goes well I will be qualified by mid May.


As I am already aware that experience is worth more than qualifications in this trade I am looking to start work as a plumbers mate in May. I will hold also CSCS card so I can work on site. I will have my own tools and clothing, however at the moment I will only have a car as transport until I am back in paid work and can afford to get a van.


If anyone is interested in giving a newbie a chance in the trade then please DM me, I will be willing to work all hours on any day or whatever is required of me


Thanks
Andy
 
Status
Not open for further replies.

Reply to Looking for plumbers mate work to start May Bath/Bristol/Somerset/Wiltshire area in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
297
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
199
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
6
Views
138
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
216
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
353
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock