Search the forum,

Discuss Looking for a gas safe engineer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

Old Account

Hello Lads,

I have got another job in east London near Mile End.

Works:

- draining solar system,
- removing the solar system
- boiler swap ( new boiler - Worcester )
- installation nest,hive or evohome room stat
- ufh checking that it runs alright.

current boiler:

Boiler: Main 18 HE
Wall: solid

if someone is willing and interested to do the job with me I would very much appreciate it.
Please pm me

IMG_2304.jpgIMG_2309.jpgIMG_2310.jpg


kind regards

ron
 
I understand it is not really easy but I would certainly give a hand to sort this installation out.
 
Great opportunity for anyone who is in need of work. Thanks for posting this on the forum.
 
Great opportunity for anyone who is in need of work. Thanks for posting this on the forum.

Thank you, but I also would gain on knowledge and would be happy to give a hand.
 
Hi lads,

I am still looking for someone if anyone is interested give me a shout please. Would be much appreciated
 
Status
Not open for further replies.

Reply to Looking for a gas safe engineer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
193
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
241
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
141
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
99
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock