Search the forum,

Discuss Is that to regulations or not? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

Old Account

Hello lads,

Despite the rough,dirty,disgusting,awful, bath is the boiler / water heater to regs installed ?

Like location etc ?

Apparently 8months old only and I would report it if it's not the case. I just got the phone call on Sunday to install a new shower :,,,((( I guess this time I will walk away , what would you do ?

Kind regards

Ron

IMG_3495.JPG


IMG_3496.JPG


IMG_3497.JPG
 
It’s not pretty, but as it’s room sealed and I believe there a no electrics on it and provided no other identifiable defects, it appears compliant. I’d get them to show you the install certificate though.
 
Thank you guys for the fast respond. But thinking of turning the job down :/ not happy with this sort of dirt
 
Id make my excuses excuses and leave....in true News of the World style ......brum
 
Status
Not open for further replies.

Reply to Is that to regulations or not? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
5
Views
125
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
121
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
206
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
109
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock