Search the forum,

Discuss Identifing parts. Objective adjust shower water temperature. in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
1
Hi,

I hope to adjust the shower mixer tap temperature by adjusting the physical device regulator, that goes by several names/terms. I have experience of this with sink/basin mixer taps and that was straight forward. I have attached four images and seek assistance to identify what they are. Some may not be to do with plumbing. Photo D is the shower cartridge, but it does not have an obvious temperature adjuster.

Thank you.
 

Attachments

  • Plumbing Q1.jpg
    Plumbing Q1.jpg
    151.8 KB · Views: 9
  • Plumbing Q2.jpg
    Plumbing Q2.jpg
    206.1 KB · Views: 7
  • Plumbing Q3.jpg
    Plumbing Q3.jpg
    194 KB · Views: 9
  • Plumbing Q4.jpg
    Plumbing Q4.jpg
    184.8 KB · Views: 9
Last edited:
B
 

Reply to Identifing parts. Objective adjust shower water temperature. in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock